Cub Cadet 54-inch Manual do Operador

Consulte online ou descarregue Manual do Operador para Corta-relvas Cub Cadet 54-inch. Cub Cadet 54-inch Operator`s manual Manual do Utilizador

  • Descarregar
  • Adicionar aos meus manuais
  • Imprimir
  • Página
    / 20
  • Índice
  • MARCADORES
  • Avaliado. / 5. Com base em avaliações de clientes
Vista de página 0
PRINTED IN U.S.A.
FORM NO. 770-0840F
Model Numbers
289
295
IMPORTANT:
48" and 54" MOWER DECKS
READ SAFETY RULES AND INSTRUCTIONS CAREFULLY
INSTALLATION AND
Operator’s Manual
MAINTENANCE INSTRUCTIONS
(10/04)
CUB CADET LLC P.O. BOX 361131 CLEVELAND, OHIO 44136-0019 [www.cubcadet.com]
ECO 18790
For Series 3000 Tractors
Vista de página 0
1 2 3 4 5 6 ... 19 20

Resumo do Conteúdo

Página 1 - Operator’s Manual

PRINTED IN U.S.A.FORM NO. 770-0840FModel Numbers289295IMPORTANT:48" and 54" MOWER DECKSREAD SAFETY RULES AND INSTRUCTIONS CAREFULLYINSTALLAT

Página 2 - IMPORTANT

108. From the side of the tractor, raise the front lift rodand roll the deck forward until the lift rod aligns withslots of the deck front roller brac

Página 3

11NOTEIf you do not lock the drive shaft auto-lok collarin the released position (step 12), it will benecessary to compress and hold the collarrearwar

Página 4

12SECTION III. ADJUSTMENTSDECK LEVELING ADJUSTMENTSNOTETractors built Mfg. Code 1K060G and after areequipped with a deck downstop feature whichcan be

Página 5 - TO THE OWNER

13B. FRONT TO BACK LEVELINGThe front lift rod must be correctly adjusted to maintainthe proper pitch of the deck when mowing uneven terrain.1. Adjust

Página 6 - DECK ASSEMBLY

141. Use the tractor lift system to raise the mower deckoff the ground.2. Remove the internal cotter pin, flat washer, and ad-justment clevis pin from

Página 7

15SECTION IV. MAINTENANCECLEANING THE DECK Using Deck Wash System - Model 295 ONLYWARNINGWhen using the deck wash system, neverengage the deck from an

Página 8

16When reinstalling the blades, be sure they are installedso that the wind wings are pointing upward toward thetop of the deck. Tighten the nuts to 90

Página 9

17Figure 31 6. Unhook the idler spring from the top of the idlerspring screw near the RH spindle assembly. It isnot necessary to remove the spring fr

Página 10

18LUBRICATION GUIDEThe life of any machine depends upon the care it is given. Proper lubrication is a very important partof that care.Be certain that

Página 11 - PTO SHAFT

19PRODUCT GRAPHICSKeep safety product graphics (decals) clean. Replaceany safety graphic that is damaged, destroyed,missing, painted over or can no lo

Página 12 - SECTION III. ADJUSTMENTS

2CONTENTSSection PageSafe Operation Practices ...

Página 13

MANUFACTURER’S LIMITED WARRANTY FOR:The limited warranty set forth below is given by Cub Cadet LLC with respect to new merchandise purchased and used

Página 14

35. Be sure the area is clear of other people beforemowing. Stop machine if anyone enters the area.6. Never carry passengers.7. Disengage the blades b

Página 15 - SECTION IV. MAINTENANCE

4Do not try to stabilize the machine by putting your footon the ground.Do not use the grass catcher on steep slopes.Do not tow heavy pull behind attac

Página 16

514. Observe proper disposal laws and regulations.Improper disposal of fluids and materials canharm the environment and the ecology.a. Prior to dispos

Página 17

6SECTION I. TRACTOR AND DECK PREPARATIONWARNINGWhen handling the mower deck, be careful notto cut yourself on the sharp blades.Remove the top and brea

Página 18 - LUBRICATION GUIDE

7B. TRACTOR PREPARATIONWARNINGPlace the tractor on a level surface and engagethe parking brake lever.NOTETractors built Mfg. Code 1K060G and after are

Página 19

8SECTION II. INSTALLATION AND REMOVAL OF MOWER DECK A. INSTALLATION OF DECKAfter locking the left lift link as described in Section I(step B-2), start

Página 20

9WARNINGBefore installing the mower deck, place thePTO switch in the “OFF” position, engage theparking brake lever, and turn ignition key to the“OFF”

Comentários a estes Manuais

Sem comentários