Cub Cadet 7532 Manual do Operador descarregar pdf (Página 109)

LUBRICATION/FILTERS/FRUIDS

101

Hydrostatic System Filter (Hydrostatic Drive)

Filter Change Interval Every 200 hours (See NOTE)

NOTE: Change the filter after the first 50 hours of operation and every 200

hours of operation thereafter. Replace the filter more frequently when

operating under unusual dirt and dust conditions. Your Dealer has approved

genuine filters. Do not use other type filters.

When the transmission fluid filter needs changing, change the filter as

follows:

1. Drain the transmission oil. See Transmission Oil Change in this manual.

2. Remove the hydrostatic system filter by turning it counterclockwise.

Use a filter wrench, if necessary.

3. Apply clean oil to the O-ring on the new filter.

4. Install the new filter. Turn the filter clockwise until the O-ring comes in

contact with the filter head surface. Tighten the filter an additional 2/3

turns by hand.

5. Add the transmission oil through the fill port and check the oil level.

6. Run the engine and check for leaks.

7. After stopping the engine, check the oil level. If it is low, add clean oil.

HYDROSTATIC

SYSTEM

FILTER

HYDROSTATIC

SYSTEM

FILTER

INSTALL

REMOVE

1 2 ... 104 105 106 107 108 109 110 111 112 113 114 ... 125 126

Sem comentários

Cub Cadet 7532 Manual do Operador Página 109